News

The sawdust pellet machine is mainly an environmentally friendly mechanical equipment that processes the solid waste generated by agriculture and forestry into biomass pellet fuel at one time without adding binders. It has unique design, beautiful appearance, simple operation, convenient use, Low failure rate, long life and so on. How to operate the wood pellet …

When the machine is processing, there will be some processing sounds, but the difference is that if the sawdust pellet machine breaks down, the sound is different from the original machine sound. Some noises indicate that there is a fault. What should I do in case of failure? Sawdust pellet machine failure performance: The particle …

After the wood pellet machine has been working for a period of time, due to long-term work, the machine will not be able to work due to the high temperature, which will cause losses. Then why the machine temperature is too high, and how to deal with these problems, let’s take a look together below …

The feed pellet machine is a machine that processes some materials into feed. After using such a machine for a period of time, the efficiency of the machine will inevitably decrease. What we need to do is to adjust in time to improve the working efficiency of the machine, so how to improve the machine …

During the use of the wood pellet machine, there will be various failures. Among them, there are many reasons for the machine blockage during use. Everyone knows that a good machine can work better. Find the cause of the failure and fix it. Solving the problem can save a lot of trouble. Reasons and solutions …

Ring die pellet machine is a kind of equipment that processes solid waste such as straw, wood chips, bark and branches, etc. into dyes. What is the specific operation process of the machine? 1. Select the appropriate die hole form, opening ratio and compression ratio (compression ratio = proper length of the die hole/diameter of …

The wood pellet machine is a machine used to make wood pellets. If there is a sound inside the machine during use. There may be the following reasons 1. It may be caused by our own operation, or it may be caused by too many methods when we put it in, so that the particles …